Tiling Repairs in Ayr, Ayrshire

Yes — replacing a single tile without damaging adjacent tiles is the kind of careful work John does regularly. The cracked tile is cut out using an angle grinder with a diamond blade, keeping the cut within the grout lines, and the adhesive is removed without lifting the tiles around it. A new tile is then set with matching adhesive and the joints grouted to match the existing colour as closely as possible. The main limiting factor is whether you can source a matching tile — if the bathroom is old, the exact tile may not be available. John can help identify the closest available match or advise on alternatives.

If the grout is failing in multiple areas — cracking, crumbling or discolouring across more than a few joints — full regrouting of the tiled area is usually more effective than patching individual sections. Partial regrouting rarely blends well because new grout is always slightly lighter than existing grout that has stained or aged. John assesses the extent of the failure at the job and advises on whether section repair or a full regrout makes more sense. A full bathroom regrout typically takes half a day and leaves a uniform result that will last years.

Close matching is usually achievable — there are a wide range of grout colours available and John can match standard white, cream, grey and coloured grouts to within a close tolerance. The challenge is that existing grout has aged and stained over time, so new grout will initially look slightly different. As it cures and takes a bit of use it typically closes the gap. For a full regrout, the difference is irrelevant — the whole surface gets the same new grout and the result is uniform. John will show you the closest available match before starting any partial grout repair work.